picdopa.blogg.se - Switch downgrade firmware

SWITCH DOWNGRADE FIRMWARE UPDATE
SWITCH DOWNGRADE FIRMWARE PC

When the tool finishes, press any button.Wait about 1-2 minutes for the tool to dump your firmware.Using the joystick and the A buttons, select FirmwareDump.te.Inject TegraExplorer.bin using TegraRCMGUI (Like you would with Hekate).

SWITCH DOWNGRADE FIRMWARE UPDATE

If your sysMMC is not up-to-date, update it through the System Settings.

If you haven't already, update the sysMMC to the latest firmware.

Update Atmosphere and Hekate by using the above guides.

SWITCH DOWNGRADE FIRMWARE PC

Download TegraExplorer.bin and place it somewhere on your PC (A good idea is to put it where you keep all your switch payloads like Hekate).Insert your microSD card into your computer.Otherwise, you can safely update your system firmware through the system settings. If this happens, you will not be able to use the gamecard slot as long as you are on the newer firmware. If you boot into RCM on each boot (for example by using AutoRCM), this means that the gamecard slot will not be updated and you can downgrade below that version.

If at least one of the versions you are updating towards also updates the gamecard firmware, you will not be able to downgrade below that version without making the gamecard slot unusable until you update.Ītmosphere (and Hekate) come bundled with patches that automatically disable the gamecard slot if it is detected that the system has an older gamecard firmware that would be updated. Latest supported Atmosphere & Hekate revision Reference the table below for information about these.

In addition, updating to or past some firmwares update the gamecard firmware. Tap "Save Options" at the bottom of the screen.Īlways check before updating your system firmware if the latest version of Atmosphere as well as the latest version of Hekate support the firmware version you are updating towards.Ĭurrently the latest version supported by Atmosphere and Hekate is: 13.0.0. Turn "Update Reboot 2 Payload" on the bottom right ON (if it isn't on already).

Go to the Options tab at the top right of the screen.

Put your SD card back in your Switch and launch Hekate.

If you are asked to overwrite or merge files while copying, say yes to merge/overwrite them.

Copy the bootloader folder from the Hekate.

Download the latest version of Hekate (Download the hekate_ctcaer_(version).zip release of hekate).

When a new version of Hekate releases, you can update by following these steps: They may list important changes and modifications to your system. When updating Hekate always make sure to read the release notes.

Put your SD card back in your Switch and launch CFW.

(If your hekate is not on the latest version) Update hekate via the steps below.

If you are prompted to overwrite files, do so.

Download the latest release of Atmosphere (Download the atmosphere-(version)-master-(version)+hbl-(version)+hbmenu-(version).zip release of Atmosphere.).

Turn off your Nintendo Switch and plug your SD card in your computer.

When a new version of Atmosphere releases, you can update Atmosphere by following these steps: You will have to delete the sept folder from your sd, delete fusee-secondary.bin from your atmosphere folder and update your hekate config file: hekate_ipl.ini in the bootloader folder. If you update from below Atmosphere 1.0.0, there are additional steps to follow.